Alfa Laval LKH110/112/113/114
R5,133.60
LKH110 Sizing & Engineering Specification Matrix
Verify your multistage pump nameplate data and select the exact dimensional profile required for your facility:
| Target Pump Range | Nominal Shaft Size | Standard Face Pairings | Secondary Elastomers | Typical Applications |
|---|---|---|---|---|
| LKH-112 / 113 / 114 Single | 32.0 mm | Carbon (Rotary) vs. Silicon Carbide (Stationary) | Food-Grade EPDM, Viton, NBR | High-pressure RO & filtration |
| LKH-112 / 113 / 114 Flushed | 32.0 mm | Silicon Carbide vs. Silicon Carbide (SiC/SiC) | Food-Grade EPDM, Viton, NBR | Abrasive slurries & hot syrups |
2 in stock
Alfa Laval LKH110 Mechanical Seals: High-Pressure Multistage Pump Seals []
Optimize your high-capacity, high-pressure processing lines with our premium, OEM-standard replacement shaft seals for Alfa Laval LKH110 Multistage Centrifugal Pumps. Specially built to endure the intensified hydraulic loads and system vibrations unique to multi-impeller pumping systems—including LKH-112, LKH-113, and LKH-114 configurations—these replacement kits ensure an absolute, leak-proof barrier.
Our premium components serve as a direct, physical drop-in swap for factory part numbers like 9611922108, maintaining strict process containment at a lower cost of ownership
Advanced Front-Loading Design for High-Pressure Utilities
Unlike standard industrial pumps, the Alfa Laval LKH Multistage series features an advanced front-loading mechanical seal arrangement. This external design profile drastically improves system cleanliness and cuts down routine overhaul intervals:
- External Spring Placement: All mechanical springs, clips, and drive rings are mounted completely outside the fluid wetted area. This eliminates product baking on the hardware and ensures total CIP (Clean-in-Place) and SIP (Steam-in-Place) efficiency.
- Pressure-Shock Balance: Engineered with a built-in balanced hydraulic profile that prevents the seal faces from popping open during unforeseen downstream line restrictions or intense system pressure spikes.
- Fast Maintenance Overhauls: Service, inspect, or replace your sliding rings in minutes straight from the front cover plate without decoupling any high-pressure pipeline connections or removing the heavy pump casing.
Available Configurations & Materials
LKH110 Single Mechanical Seals
- Best For: General high-pressure utility transfers involving clean, low-viscosity hygienic fluids like purified waters, juices, beer, milk, and dairy whey.
- Standard Build: Employs an internal design utilizing premium Silicon Carbide (SiC) vs. Carbon faces paired with food-grade EPDM or Viton (FKM) secondary elastomer O-rings.
LKH110 Flushed Mechanical Seals
- Best For: High-temperature fluids or sticky, sugary concentrates (liquified sugars, glucose, syrups) that can crystallize and shred standard faces when exposed to atmosphere.
- Active Overheating Protection: Introduces a secondary long-lasting lip seal housing that circulates low-pressure water or a steam quench to cool the faces and continuously wash away abrasive deposits.
Why Source Our Aftermarket Alfa Laval LKH110 Seals?
- Complete Kit Integration: Our LKH110 repair kits ship complete with all the required stationary seats, rotating faces, drive springs, and application-specific O-rings for a seamless overhaul.
- Certified Sanitary Compliance: Manufactured entirely out of non-toxic, FDA-approved base materials, completely matching strict global sanitary processing benchmarks.
- High-End Filtration Support: Specifically optimized to maintain a perfect seal during intense reverse osmosis, nano-filtration, and ultra-filtration boosting processes.
Stop expensive processing leaks and preserve system pressure today.
Shop Our Full Alfa Laval Seal Inventory or Connect with Our Technical Desk to receive volume pricing.
Shop Our Full Alfa Laval Seal Inventory or Connect with Our Technical Desk to receive volume pricing.
Additional information
| Weight | 0.25 kg |
|---|---|
| Dimensions | 10 × 10 × 15 cm |
